On Thu, 10 Nov 2022 00:17:09 -0600
VanguardLH <V@nguard.LH> wrote:

> pinnerite <pinnerite@gmail.com> wrote:
>
> > Fujitsu fi-6130
>
> Discontinued product:
> https://www.fujitsu.com/global/products/computing/peripheral/scanners/fi/discontinued/fi6130/fi6130.html
>
> Says it runs on Windows 10, and:
>
> Comes bundled with the "automatic job separation" function armed
> ScandAll PRO Ver1.5 image capture software
>
> However, v1.5 was discontinued, too, and you need to get the v2 update.
>
> https://www.fujitsu.com/global/support/products/computing/peripheral/scanners/fi/software/fi-6x30.html
>
> Shows ScandAll v1 last released in 2013 is not supported on Windows 10,
> but shows v2 does that was released in 2015 (which is when Windows 10
> was released). I clicked on the v2.0.21 link which goes to:
>
> https://www.fujitsu.com/global/support/products/computing/peripheral/scanners/fi/software/pro-v2.html
>
> Says it is an update. Usually that means you need a full version before
> that. Also hinted by the instructions which say "This creates a folder
> called "SAPV210VUP" in the same folder where the program is stored."
> So, ScandAll v2 full has to be previously installed. There is a link to
> the fi Series web site, with software listed at:
>
> https://www.fujitsu.com/global/products/computing/peripheral/scanners/business/#software
>
> ScandAll is not listed there. I found:
>
> https://imagescanner.fujitsu.com/global/dl/
>
> and entered:
>
> Series = fi-6100
> Scanner = fi-6130/fi-6230
> Target OS = Windows 10
>
> and clicked on "Display software list". That brought me full circle
> back to the 2nd link I mentioned above.
>
> You sure you cannot use the TWAIN driver in Windows 10, and then use a
> 3rd party scanner program?
>
> https://en.wikipedia.org/wiki/TWAIN
>
> https://www.fujitsu.com/global/support/products/computing/peripheral/scanners/fi/software/v9211600.html
>
> Windows 10 probably already has the TWAIN driver that will work with
> that scanner. Did you yet attach the scanner, and scan for new hardware
> (under Windows 10, Device Manager (devmgmt.msc) -> right-click on
> computer/root node, scan for new hardware) to see if your scanner got
> found?
>
> For a free TWAIN-compliant scanner program, you could ask in the
> alt.comp.freeware newsgroup, or do an online search, like:
>
> https://www.google.com/search?q=free+twain+scanner+program

Thank you. I didn't post until checking all the options.
By the eway My model is not fi-6130 it is fi-6120.

Luckily it works veery well with xsane under Linux.
It is bit slow because I have to click once for every sheet.