How to Remove FRP Lock on Samsung J600G with U2 U3 COMBINATION Firmware

If you have a Samsung J600G phone that is locked by Google account verification after performing a factory reset, you may be looking for a way to bypass the FRP lock and regain access to your device. Fortunately, there is a solution that involves flashing a combination firmware file using Odin tool. In this article, we will show you how to remove FRP lock on Samsung J600G with U2 U3 COMBINATION Firmware in easy steps.

Samsung J600G Frp Remove U2 U3 COMBINATION Firmware
Download File https://urllio.com/2wGtlo

What is FRP Lock and COMBINATION Firmware?

FRP or Factory Reset Protection is a security feature on Android devices that prevents unauthorized access to your phone after a factory reset. It requires you to sign in with the Google account that was previously synced on your device before you can use it again.

COMBINATION Firmware is a special type of firmware that is used to test or debug various features of Samsung devices. It can also be used to bypass or remove the FRP lock on Samsung devices by flashing it using Odin tool.

How to Download Samsung J600G U2 U3 COMBINATION Firmware?

To download the Samsung J600G U2 U3 COMBINATION Firmware, you need to follow these steps:

Visit this link and select the COMBINATION file that matches your device's binary version. You can check your device's binary version by dialing *#1234# on your phone.
Extract the downloaded ZIP file using a ZIP archiver like WinRAR, 7Zip, PowerArchiver, etc.
Rename the AP and BL files by adding .rar extension after .md5.
Extract the AP and BL files using a ZIP archiver again.
You will get four files: boot.img, sboot.bin, cm.bin, and userdata.img. These are the files that make up the COMBINATION firmware.

How to Flash Samsung J600G U2 U3 COMBINATION Firmware using Odin?

To flash the Samsung J600G U2 U3 COMBINATION Firmware using Odin, you need to follow these steps:

Download and install Odin tool on your PC.
Download and install Samsung USB drivers on your PC.
Turn off your Samsung J600G phone and boot it into Download Mode by pressing and holding Volume Down + Home + Power buttons together until you see a warning screen. Then press Volume Up to confirm.
Connect your phone to your PC using a USB cable. Odin should recognize your device and show an ID:COM port number in blue.
Click on the BL button in Odin and select the sboot.bin file from the extracted COMBINATION firmware folder.
Click on the AP button in Odin and select the boot.img file from the extracted COMBINATION firmware folder.
Click on the CP button in Odin and select the cm.bin file from the extracted COMBINATION firmware folder.
Click on the CSC button in Odin and select the userdata.img file from the extracted COMBINATION firmware folder.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin. Do not check any other option.
Click on the Start button in Odin and wait for the flashing process to complete. Your phone will reboot automatically when done.

How to Remove FRP Lock on Samsung J600G after Flashing COMBINATION Firmware?

To remove FRP lock on Samsung J600G after flashing COMBINATION firmware, you need to follow these steps:

After your phone reboots, you will see a Factory Binary screen with some options. Select Settings from there.
In Settings, go to Developer Options and enable USB Debugging and OEM Unlock
35727fac0c