Rocksolid Light

Welcome to Rocksolid Light

mail  files  register  newsreader  groups  login

Message-ID:  

Show me a man who is a good loser and I'll show you a man who is playing golf with his boss.

interests / rec.woodworking / Re: Should I use mineral spirits after sanding between polyurethane coats

SubjectAuthor
* Re: Should I use mineral spirits after sanding between polyurethane coatsTbone123
`* Re: Should I use mineral spirits after sanding between polyurethaneBill
 +- Re: Should I use mineral spirits after sanding between polyurethane coatsMarkem618
 +- Re: Should I use mineral spirits after sanding between polyurethane coatsScott Lurndal
 `- Re: Should I use mineral spirits after sanding between polyurethaneLeon

1
Re: Should I use mineral spirits after sanding between polyurethane coats

<17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com>

  copy mid

https://news.novabbs.org/interests/article-flat.php?id=8690&group=rec.woodworking#8690

  copy link   Newsgroups: rec.woodworking
From: 90f15ad946daa2ac849b9f1b709ac8d8@example.com (Tbone123)
Newsgroups: rec.woodworking
Subject: Re: Should I use mineral spirits after sanding between polyurethane coats
X-Poster: Hermes 2.0
References: <1169062977.417329.12240@38g2000cwa.googlegroups.com> <xnejptwgs8.fsf@delorie.com> <45af354a$0$7857$4c368faf@roadrunner.com> <xnr6tsuubb.fsf@delorie.com> <45afb29c$0$7670$4c368faf@roadrunner.com>
In-Reply-To: <45afb29c$0$7670$4c368faf@roadrunner.com>
Content-Transfer-Encoding: 8bit
Injection-Info: 9ecd27dc80909b5f9e5db70f1b6f7036;cf7a89e5c3d971c10a65f4b230479aa6
Content-Type: text/plain; charset="utf-8"; format="flowed"
Lines: 5
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!diablo1.usenet.blueworldhosting.com!peer03.iad!feed-me.highwinds-media.com!news.highwinds-media.com!feeder.usenetexpress.com!tr2.iad1.usenetexpress.com!news.newsgroupdirect.com!not-for-mail
Date: Wed, 31 May 2023 17:31:59 +0000
Nntp-Posting-Date: Wed, 31 May 2023 17:31:59 +0000
Organization: NewsgroupDirect
X-Complaints-To: abuse@newsgroupdirect.com
Message-Id: <17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com>
X-Received-Bytes: 1276
 by: Tbone123 - Wed, 31 May 2023 17:31 UTC

I think the question is, is it recommended to clean sand dust with mineral spirits before applying next coat?

--
For full context, visit https://www.homeownershub.com/woodworking/should-i-use-mineral-spirits-after-sanding-between-polyureth-360422-.htm

Re: Should I use mineral spirits after sanding between polyurethane coats

<WKQdM.753925$5CY7.289547@fx46.iad>

  copy mid

https://news.novabbs.org/interests/article-flat.php?id=8691&group=rec.woodworking#8691

  copy link   Newsgroups: rec.woodworking
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!1.us.feeder.erje.net!feeder.erje.net!usenet.blueworldhosting.com!diablo1.usenet.blueworldhosting.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx46.iad.POSTED!not-for-mail
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101
Thunderbird/91.7.0
Subject: Re: Should I use mineral spirits after sanding between polyurethane
coats
Content-Language: en-US
Newsgroups: rec.woodworking
References: <1169062977.417329.12240@38g2000cwa.googlegroups.com>
<xnejptwgs8.fsf@delorie.com> <45af354a$0$7857$4c368faf@roadrunner.com>
<xnr6tsuubb.fsf@delorie.com> <45afb29c$0$7670$4c368faf@roadrunner.com>
<17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com>
From: nonegiven@att.net (Bill)
In-Reply-To: <17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
X-Antivirus: Avast (VPS 230531-8, 5/31/2023), Outbound message
X-Antivirus-Status: Clean
Lines: 7
Message-ID: <WKQdM.753925$5CY7.289547@fx46.iad>
X-Complaints-To: https://www.astraweb.com/aup
NNTP-Posting-Date: Wed, 31 May 2023 23:28:54 UTC
Date: Wed, 31 May 2023 19:28:55 -0400
X-Received-Bytes: 1355
 by: Bill - Wed, 31 May 2023 23:28 UTC

On 5/31/2023 1:31 PM, Tbone123 wrote:
> I think the question is, is it recommended to clean sand dust with
> mineral spirits before applying next coat?
>

I sand lightly and clean. No mineral spirits are necessary.
At least, that's what I do, and it comes out very well.

Re: Should I use mineral spirits after sanding between polyurethane coats

<oqqf7ilo2ap5068k446ber9m82ua322k4c@4ax.com>

  copy mid

https://news.novabbs.org/interests/article-flat.php?id=8692&group=rec.woodworking#8692

  copy link   Newsgroups: rec.woodworking
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Thu, 01 Jun 2023 00:52:45 +0000
From: markrm618@hotmail.com (Markem618)
Newsgroups: rec.woodworking
Subject: Re: Should I use mineral spirits after sanding between polyurethane coats
Date: Wed, 31 May 2023 19:52:46 -0500
Message-ID: <oqqf7ilo2ap5068k446ber9m82ua322k4c@4ax.com>
References: <1169062977.417329.12240@38g2000cwa.googlegroups.com> <xnejptwgs8.fsf@delorie.com> <45af354a$0$7857$4c368faf@roadrunner.com> <xnr6tsuubb.fsf@delorie.com> <45afb29c$0$7670$4c368faf@roadrunner.com> <17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com> <WKQdM.753925$5CY7.289547@fx46.iad>
User-Agent: ForteAgent/8.00.32.1272
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 12
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-91z0e1JGAgN8VjyJYzTDc0RXB0WKlhI9dFaIn0jNnxZHEZIRsg6tMCtgSbI1jBAGk+B2wiJZrxV1k3P!mOegI6PEwaYq1OcbJQ2goJ4QBl8CV0QyWu8a79tq6DjBncNQcRyQ2Mqkp2O4MJuOfwJNOA==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: Markem618 - Thu, 1 Jun 2023 00:52 UTC

On Wed, 31 May 2023 19:28:55 -0400, Bill <nonegiven@att.net> wrote:

>On 5/31/2023 1:31 PM, Tbone123 wrote:
>> I think the question is, is it recommended to clean sand dust with
>> mineral spirits before applying next coat?
>>
>
>I sand lightly and clean. No mineral spirits are necessary.
>At least, that's what I do, and it comes out very well.

A tack cloth is probably better than mineral spirits, poor quality
solvents are likely to cause finishing issues.

Re: Should I use mineral spirits after sanding between polyurethane coats

<zP1eM.858716$PXw7.133507@fx45.iad>

  copy mid

https://news.novabbs.org/interests/article-flat.php?id=8694&group=rec.woodworking#8694

  copy link   Newsgroups: rec.woodworking
Path: i2pn2.org!i2pn.org!news.neodome.net!feeder1.feed.usenet.farm!feed.usenet.farm!peer02.ams4!peer.am4.highwinds-media.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx45.iad.POSTED!not-for-mail
X-newsreader: xrn 9.03-beta-14-64bit
Sender: scott@dragon.sl.home (Scott Lurndal)
From: scott@slp53.sl.home (Scott Lurndal)
Reply-To: slp53@pacbell.net
Subject: Re: Should I use mineral spirits after sanding between polyurethane coats
Newsgroups: rec.woodworking
References: <1169062977.417329.12240@38g2000cwa.googlegroups.com> <xnejptwgs8.fsf@delorie.com> <45af354a$0$7857$4c368faf@roadrunner.com> <xnr6tsuubb.fsf@delorie.com> <45afb29c$0$7670$4c368faf@roadrunner.com> <17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com> <WKQdM.753925$5CY7.289547@fx46.iad>
Lines: 10
Message-ID: <zP1eM.858716$PXw7.133507@fx45.iad>
X-Complaints-To: abuse@usenetserver.com
NNTP-Posting-Date: Thu, 01 Jun 2023 14:21:19 UTC
Organization: UsenetServer - www.usenetserver.com
Date: Thu, 01 Jun 2023 14:21:19 GMT
X-Received-Bytes: 1333
 by: Scott Lurndal - Thu, 1 Jun 2023 14:21 UTC

Bill <nonegiven@att.net> writes:
>On 5/31/2023 1:31 PM, Tbone123 wrote:
>> I think the question is, is it recommended to clean sand dust with
>> mineral spirits before applying next coat?
>>
>
>I sand lightly and clean. No mineral spirits are necessary.
>At least, that's what I do, and it comes out very well.

A tack cloth is useful to remove the sanding dust.

Re: Should I use mineral spirits after sanding between polyurethane coats

<AsydnfbRd-qw0eb5nZ2dnZfqnPGdnZ2d@giganews.com>

  copy mid

https://news.novabbs.org/interests/article-flat.php?id=8699&group=rec.woodworking#8699

  copy link   Newsgroups: rec.woodworking
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Sat, 03 Jun 2023 14:20:29 +0000
Date: Sat, 3 Jun 2023 09:20:29 -0500
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
Thunderbird/102.11.1
Subject: Re: Should I use mineral spirits after sanding between polyurethane
coats
Content-Language: en-US
Newsgroups: rec.woodworking
References: <1169062977.417329.12240@38g2000cwa.googlegroups.com>
<xnejptwgs8.fsf@delorie.com> <45af354a$0$7857$4c368faf@roadrunner.com>
<xnr6tsuubb.fsf@delorie.com> <45afb29c$0$7670$4c368faf@roadrunner.com>
<17644ab906084767$23$332549$47d3cdde@news.newsgroupdirect.com>
<WKQdM.753925$5CY7.289547@fx46.iad>
From: lcb11211@swbelldotnet (Leon)
In-Reply-To: <WKQdM.753925$5CY7.289547@fx46.iad>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID: <AsydnfbRd-qw0eb5nZ2dnZfqnPGdnZ2d@giganews.com>
Lines: 21
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-gMyHnh76GtJQorg1/R+tJ+0eEpLP5XPU+sZ0Rh4yMaah6/FsWGaAb5lY1thoSKDNGK0kQpNWP66gPmf!HowiUj0jadH8WEncGnqmmnFXfZd6LaudaOtyylnQ5il5jBIyJ1BK4VMGtrWNsOla+Y5OtISA
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: Leon - Sat, 3 Jun 2023 14:20 UTC

On 5/31/2023 6:28 PM, Bill wrote:
> On 5/31/2023 1:31 PM, Tbone123 wrote:
>> I think the question is, is it recommended to clean sand dust with
>> mineral spirits before applying next coat?
>>
>
> I sand lightly and clean. No mineral spirits are necessary.
> At least, that's what I do, and it comes out very well.

I use Festool sanders with a dust extraction so there is little to no
dust left on the surface, NOW.

Before dust extraction I simply used compressed air to remove the dust.
That worked very well.

Mineral spirits works well to remove anything missed by the sanders with
dust extraction.
Mineral Spirits gives you a preview of what the wood is going to look
like with varnish applied and evaporates relatively quickly and leaves
no residue nor does it raise the grain.

1
server_pubkey.txt

rocksolid light 0.9.81
clearnet tor