kaspar48@msn.com <381783c266100b942c086329dad35573@example.com> writes:
>i have long ranger that stopped working after 10 yrs . no power when i press remote but i can hear a click sound in the box after unplugging it and plugging it back. not sure if relays are shot but if ID them (help ) my be they can be fixed or replaced ...new LR3 do not have same capacity for HP as old ones which were rated at 3 HP max. I was using it with a 3.5 motor. thanks for any help .
>
>https://www.homeownershub.com/img/2wqu
>https://www.homeownershub.com/img/2wqw
>https://www.homeownershub.com/img/2wqy
>

Well, Kaspar, This isn't an instantaneous help line, or an AI. There is
no need to post the same question three times in a row. Be patient, on
usenet it may take several days for someone to care enough to reply.

As it happens, if you search on amazon, you'll find a 30A 220VAC remote
switch for less than two double sawbucks. You'll need to wire it
yourself, but it comes with a wiring diagram. It is not complicated,
both current carrying conductors must be interrupted by the relay.

On 1/25/2023 5:32 PM, Scott Lurndal wrote:

The exact relay is available on ebay. Several vendors have stock.
Browse, but don't google, using the part number.
Enjoy nearly instant gratification.

Steve

On Wednesday, January 25, 2023 at 5:32:17 PM UTC-6, Scott Lurndal wrote:
> kasp...@msn.com <381783c266100b94...@example.com> writes:
> >i have long ranger that stopped working after 10 yrs . no power when i press remote but i can hear a click sound in the box after unplugging it and plugging it back. not sure if relays are shot but if ID them (help ) my be they can be fixed or replaced ...new LR3 do not have same capacity for HP as old ones which were rated at 3 HP max. I was using it with a 3.5 motor. thanks for any help .
> >
> >https://www.homeownershub.com/img/2wqu
> >https://www.homeownershub.com/img/2wqw
> >https://www.homeownershub.com/img/2wqy
> >
> Well, Kaspar, This isn't an instantaneous help line, or an AI. There is
> no need to post the same question three times in a row. Be patient, on
> usenet it may take several days for someone to care enough to reply.
>
> As it happens, if you search on amazon, you'll find a 30A 220VAC remote
> switch for less than two double sawbucks. You'll need to wire it
> yourself, but it comes with a wiring diagram. It is not complicated,
> both current carrying conductors must be interrupted by the relay.

I thought you were telling us a tall tale with a less than $20 remote starter for 220 Volt equipment. So I looked on Amazon, and Nope. I found what you are referring to. I would make an extension cord with this remote control box in the middle. Live power in one cord with the 3 prong on the end. Switch box in the middle. Then switched power out another cord with the female receptacle on the end. Just make a short 4 foot cord. Plug it into the outlet box and the dust collector into the other end. Pretty simple. Only knowledge you would need is how to wire up an outlet. Only wiring problem is if you are running 2 hots to get 220 volts, you would also run a ground wire too. Ground is always included in wiring. You would have to connect the grounds together outside the remote control box. Does not appear they put any extra room inside the remote control box for connecting the grounds inside. That would look bad and might not be too legal either.

https://www.amazon.com/dp/B07CTL3TG6/ref=sspa_dk_detail_1?pd_rd_i=B07CTL3TG6&pd_rd_w=aOvU9&content-id=amzn1.sym.dd2c6db7-6626-466d-bf04-9570e69a7df0&pf_rd_p=dd2c6db7-6626-466d-bf04-9570e69a7df0&pf_rd_r=QHFRGFQ8ZJJ1K5T7NANS&pd_rd_wg=EoIMB&pd_rd_r=6133df04-3b60-44fd-8dd4-562122ee07e7&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzTjVDVU03UUc0SE9IJmVuY3J5cHRlZElkPUEwNTc3Nzg4MkJFNDg0OFkzQlpJQSZlbmNyeXB0ZWRBZElkPUEwMzg4NjY5MjNLWE03MUhZVkFRMiZ3aWRnZXROYW1lPXNwX2RldGFpbF90aGVtYXRpYyZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1

"russellseaton1@yahoo.com" <ritzannaseaton@gmail.com> writes:
>On Wednesday, January 25, 2023 at 5:32:17 PM UTC-6, Scott Lurndal wrote:
>> kasp...@msn.com <381783c266100b94...@example.com> writes:=20
>> >i have long ranger that stopped working after 10 yrs . no power when i p=
>ress remote but i can hear a click sound in the box after unplugging it and=
> plugging it back. not sure if relays are shot but if ID them (help ) my be=
> they can be fixed or replaced ...new LR3 do not have same capacity for HP =
>as old ones which were rated at 3 HP max. I was using it with a 3.5 motor. =
>thanks for any help .=20
>> >=20
>> >https://www.homeownershub.com/img/2wqu=20
>> >https://www.homeownershub.com/img/2wqw=20
>> >https://www.homeownershub.com/img/2wqy=20
>> >
>> Well, Kaspar, This isn't an instantaneous help line, or an AI. There is=
>=20
>> no need to post the same question three times in a row. Be patient, on=20
>> usenet it may take several days for someone to care enough to reply.=20
>>=20
>> As it happens, if you search on amazon, you'll find a 30A 220VAC remote=
>=20
>> switch for less than two double sawbucks. You'll need to wire it=20
>> yourself, but it comes with a wiring diagram. It is not complicated,=20
>> both current carrying conductors must be interrupted by the relay.
>
>I thought you were telling us a tall tale with a less than $20 remote start=
>er for 220 Volt equipment.

"two double sawbucks" == $40.

Thank you. This looks doable.

--
For full context, visit https://www.homeownershub.com/woodworking/long-ranger-3-220-v-3275195-.htm